- Home /
- CABLE GLANDS & CLEATS /
- CABLE CLEATS /
- TREFOIL CLEATS /
- CMP ENDURANCE (SDSSC) STANDARD DUTY STAINLESS STEEL CABLE CLEAT, TOP OPENING
Shop Now
- CABLE & CONDUCTOR
- CABLE GLANDS & CLEATS
- CABLE HAULING
- CABLE IDENTIFICATION
- CABLE LUGS & LINKS
- CABLE MANAGEMENT
- CONDUIT & ACCESSORIES
- EARTHING & BONDING
- ENCLOSURES
- HEATSHRINK
- INDUSTRIAL HEATING
- LV CABLE ACCESSORIES
- MV CABLE ACCESSORIES
- OVERHEAD & SUBSTATION
- PITS/LIDS & ACCESSORIES
- PROTECTION
- RAIL
- TAPES
- TEST & MEASUREMENT
- TOOLS
- TRANSFORMER & SWITCHGEAR
- UTILITY & ASSET SPECIFIED PRODUCT
CMP ENDURANCE (SDSSC) STANDARD DUTY STAINLESS STEEL CABLE CLEAT, TOP OPENING
Description
The Endurance cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard IEC 61914: Cable cleats for electrical installations, to ensure the securing and retention of cables, without sustaining damage to the cables.
The range is fabricated from 316L stainless steel in 24 sizes from 17 - 128mm.
The top opening is designed to fit more cleats installed side by side, whilst three M10 fixing clearance holes within each base, allow the versatility of installing with either one M10 bolt or two M10 bolts. This enables installation of the Endurance to a variety of mounting surfaces.
The hinge of the Endurance opens fully, allowing cables to be easily placed within the cable cleat, before closing and securing via the mouth piece bolt.
Liners come as standard which help to restrain the cable(s) within vertical applications. Where thermal elongation of cables occurs, the liner also provides a layer of protection between the cable sheath and the cable cleat during normal operation. This additional layer protects the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The liners also assist in the extra protection of cable(s) in the event of short circuit fault conditions. The standard liners supplied are classified as Low Smoke and Fume Zero Halogen (LSF0H), Phosphorus-free.
Features
• Third party certification to IEC 61914
• 316L stainless steel
• 17 - 128mm in 24 sizes for trefoil formation / application
• Short circuit rating of 140kA peak fault
• Operating temperature -50°C to +60°C
• Standard Polymer Liners are classified as Low Smoke and Fume Zero Halogen (LSF0H), Phosphorus-free
• Combined single (M10) or two bolt (M10) fixing design
